EVA–POE–EVA Multilayer Encapsulant

PINKCITY SOLAR EPE SHEET

ENGINEERED TO PROTECT. BUILT TO PERFORM.

Three-layer co-extruded encapsulant for bifacial, TOPCon, HJT, and large-format PV module designs.

Product Overview

What Is the EPE Sheet?

The PINKCITY SOLAR EPE SHEET is a three-layer co-extruded encapsulant film combining EVA outer layers with a POE core. The EVA–POE–EVA structure is formed as a single integrated film during co-extrusion — not assembled from separate films during lamination. It is designed for bifacial modules, high-efficiency cell architectures (TOPCon, HJT), and large-format wafer formats where reduced moisture vapour transmission and PID resistance are required.

Download technical datasheet (PDF)
Layer Structure
PINKCITY SOLAR EPE SHEET — LAYER CROSS-SECTION
EVAOuter layer — frontPOE COREMiddle layerEVAOuter layer — rear
Schematic cross-section — one integrated co-extruded film. Layer thicknesses are illustrative.
  1. EVA — front outer layer: adhesion to front glass; lamination compatibility
  2. POE — core layer: moisture barrier; reduced water vapour transmission; electrical insulation
  3. EVA — rear outer layer: cell encapsulation; adhesion to backsheet
EVA outer layers

The EVA outer layers provide adhesion to the front glass and rear backsheet and are compatible with standard lamination equipment and processes. EVA is well-characterised in module production and its lamination parameters are documented in the product datasheet.

POE core

The POE core provides a moisture barrier with reduced water vapour transmission compared to standard EVA, and supports electrical insulation at the cell interface. These are structural properties of the POE material layer; measured values for this product are stated in the technical datasheet.

The EVA–POE–EVA structure is produced by co-extrusion as a single integrated film. The three layers are formed together during manufacture — not assembled from separate films during module lamination.

Encapsulation in PV Modules

What Encapsulation Films Do

Encapsulant films are the bonding and protective layers within a photovoltaic module. They sit between the glass, cells, and backsheet, and are activated during the lamination process.

Cell Protection

Encapsulant surrounds and cushions the solar cells, protecting them from mechanical stress, vibration, and handling loads during module assembly and field operation.

Adhesion

During lamination, the encapsulant bonds the front glass, cell string, and backsheet into a single integrated assembly. Adhesion quality determines the structural integrity of the finished module.

Optical Transmission

The front encapsulant layer must transmit sunlight to the cell surface with minimal absorption or reflection. Optical clarity is a key material property for front-side encapsulants.

Moisture & Environmental Barrier

The POE core layer in the EPE structure provides a moisture barrier, reducing water vapour ingress to the cell interface. This is relevant to PID (potential-induced degradation) resistance in certain module designs.

Documented characteristics

Performance properties

Properties below are drawn from the technical datasheet. Test scope and method are noted for each characteristic. Download the full datasheet or view the specifications table.

Optical transmission

≥91%

High broadband optical transmission across the full solar spectrum supports maximum cell energy conversion efficiency.

IEC 62788-1-4 (190–1100 nm)

Glass adhesion

≥60 N/cm

EVA outer layers form a strong, durable bond to front glass and rear backsheet, maintaining structural integrity over the module service life.

ASTM D903 peel test

Electrical insulation

>20 kV/mm

High dielectric strength and volume resistivity ≥1 × 10¹⁵ Ω·cm provide reliable electrical isolation between cell circuits and the module frame.

ASTM D149 dielectric strength

Cross-linking (gel content)

≥75%

Sufficient cross-linking achieved during lamination ensures long-term cohesive strength, UV stability, and resistance to creep under thermal cycling.

ASTM D2765 gel content test

Dimensional stability

MD ≤3% / TD ≤2%

Low thermal shrinkage in both machine and transverse directions ensures accurate cell positioning and prevents delamination during lamination.

150°C oven / 5 min shrinkage test

Mechanical strength

≥10 MPa / ≥500%

High tensile strength and elongation allow the film to absorb mechanical stress and thermal expansion without cracking or delaminating.

ASTM D882 tensile & elongation
Suitable Applications

Module Types

Bifacial PV modules
TOPCon cell modules
HJT cell modules
Large-format wafer modules
Standard PERC modules

Application suitability depends on product specifications, module design, processing conditions, and customer validation. Contact us to discuss your requirements.

Module Architecture

Where EPE Encapsulant Sits in a PV Module

A standard photovoltaic module is a laminated stack. The encapsulant layers bond and protect the solar cells between the front glass and the rear glass or backsheet.

Aluminium Frame (optional perimeter component)
Front GlassTempered, anti-reflective
EPE EncapsulantEVA–POE–EVA · front side
Solar CellsMono / bifacial / HJT / TOPCon
EPE EncapsulantEVA–POE–EVA · rear side
Rear Glass / BacksheetGlass or polymer backsheet
Frame encloses the laminate perimeter

Cross-section schematic — illustrative only, not to scale. Rear glass is shown; a polymer backsheet is a common alternative. Aluminium frame is an optional perimeter component and is not part of the encapsulant laminate.

How EPE Supports a Solar Module

Cell encapsulationThe encapsulant surrounds and mechanically protects solar cells within the laminated stack, holding them in position relative to the front glass and rear layer.
BondingEVA outer layers bond to the front glass and rear glass or backsheet during lamination, forming the structural integrity of the module assembly.
Optical transmissionThe film transmits incident light to the cell surface. Optical transmission is a specified property; see the datasheet for measured values.
Electrical isolationThe encapsulant provides electrical insulation between cell circuits and the module frame. Dielectric strength and volume resistivity are documented in the specifications.
Environmental & PID characteristicsThe POE core layer has a lower water vapour transmission rate than standard single-layer EVA. This characteristic is relevant to moisture ingress and PID resistance; absolute performance depends on module design, lamination process, and field conditions.

Material selection, module design, and validated processing work together to determine module performance. Refer to the product specifications or contact our team to discuss your application.

Technical Documentation

Specifications & Datasheet

The technical data sheet covers dimensional specifications, optical and mechanical properties, lamination parameters, and test method references. Download below or request a printed copy.

Product Specifications
Property
Specification
Test Method
Thickness
450–700 µm (±5%)
ASTM D6988-13
Mass per unit area
390–580 g/m² (±5%)
Weighing balance
Width
Custom (+7 / −0 mm)
Scale
Gel content
≥75%
ASTM D2765
Thermal shrinkage (MD)
≤3%
150°C oven / 5 min
Thermal shrinkage (TD)
≤2%
150°C oven / 5 min
UV cut-off wavelength
360 nm
IEC 62788-1-4
Optical transmission (190–1100 nm)
≥91%
IEC 62788-1-4
UV transmission (290–380 nm)
≥80%
IEC 62788-1-4
Dielectric strength
>20 kV/mm
ASTM D149
Glass adhesion
≥60 N/cm
ASTM D903
Tensile strength (MD & TD)
≥10 MPa
ASTM D882
Elongation
≥500%
ASTM D882
Volume resistivity
≥1 × 10¹⁵ Ω·cm
ASTM D257
Comparative tracking index
600 V
IEC 60112:2003
All values as per the current technical data sheet. Download for full specifications.
Technical Data Sheet
PINKCITY SOLAR EPE SHEET

Dimensional specifications, optical and mechanical properties, lamination parameters, and test method references.

Get Started

Evaluate the EPE Sheet for Your Module Line

Evaluation samples and production quantities are available for qualified module manufacturers. Contact our team to discuss your lamination requirements and request the current technical datasheet.